| Last Modified: 11-29-2007 | 1.6 C | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002Z1S01JX |
| Title: 3UR-FE ENGINE CONTROL: SFI SYSTEM: DESCRIPTION (2008 Sequoia) | ||
|
DTC |
P060B |
Internal Control Module A/D Processing Performance |
DESCRIPTION
This DTC is output when a communication error occurs in the ECM.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
P060B |
ECM main CPU communication error |
ECM |
MONITOR STRATEGY
|
Related DTCs |
None |
|
Required sensors/components (main) |
ECM |
|
Required sensors/components (sub) |
- |
|
Frequency of operation |
Once per driving cycle |
|
Duration |
16 seconds |
|
MIL operation |
Immediate |
|
Sequence of operation |
None |
TYPICAL ENABLING CONDITIONS
|
None |
- |
TYPICAL MALFUNCTION THRESHOLDS
|
Internal control module serial communication |
Fail |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK DTC |
(a) Clear DTC
.
(b) Turn the ignition switch off.
(c) Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
(d) Connect the cable to the negative (-) battery terminal.
(e) Turn the ignition switch to ON.
(f) Check DTC.
OK:
P060B is not present.
|
|
|